友讯DIR - 655路由器和SharePoint / SharePort
更新2010年1月16日 ：1.33b01NA已被释放 。
更新2009年11月2日：所有用户因与SharePort，指出这一最新的资料后检查问题。
更新：请务必阅读以下意见，以找出任何有关此功能的新的，有许多错误，自定的原始版本，截至2009年8月固件1.32NA最后是最新的固件，阅读并下载在这里 。
我已拥有一个D -连接迪尔- 655过去一年路由器，它是迄今为止最好的路由器，我使用过的，虽然我付$ 150比我有一个路由器之前支付更多，所以我已经收到我付出。
首先是版本1.21版在DIR 04 - 655固件现在有SharePoint的功能可用。 媒体和其他网站的部分或SharePort调用它，因为它是所谓的其他地方，包括软件本身是一个更多D方式SharePoint的连结产品在局域网上共享USB设备，我将尝试任何你不能混为一谈进一步所以我会把它从现在开始只是作为SharePort。
SharePort是一个有趣的功能，其实，我希望能够做几年前，通过共享一台计算机的USB设备，使他们可以在另一台电脑用作如果该设备实际上是插入到你的电脑。 友讯也终于在一个有限的方式SharePort这项技术的生命。
这就是SharePort工作，我将用我迪尔- 655和兄弟DCP - 150℃为例MFC的。
在DIR - 655具有背面的USB端口，测试，似乎表明它是一个USB 1.1端口，直至现在的端口是为可以在USB存储的无线设置。
在安装新的固件但是，USB接口又发现更多的使用，我们的安装，它控制下的港口使用新的菜单欢迎。
正如你所看到的没有多大的这个USB接口的设置，WCN配置是默认的，这是用于无线配置的关键，选择下拉框：
选择网络的USB置于SharePort模式的路由器，选择的3G USB适配器是一个谜位到我，我不知道这种设备还兼容，但正如大多数人一样，我有一个3G服务，并使用它作为备份，只连接设备到USB端口和USB适配器的3G选择将是非常方便。
一旦你选择了网络的USB设备会自动共享，但为了连接你必须安装从D SharePort软件连接，这仍是测试版，看来如此谨慎使用等等等等，我还没有一个问题，它，似乎还相当打磨。 一旦安装一定要允许它在启动时运行，并马上运行它，否则你将无法使用，而无需手动运行SharePort软件的每一次设备，它只使用的RAM 2MB的所以它不是一个资源猪。
如果您的USB设备并连接然后SharePort实用应该是这样显示只要你在系统托盘图标双击。 这将允许你通过一个运行的设备安装向导，您将需要您的设备的驱动程序光盘或他们的网站上最新的驱动程序，最后，您将被询问是否要自动连接到设备，如果打印时它是一台打印机，这是一个好主意，否则，你必须手动选择连接。
一旦这是所有设置每台计算机上使用该设备时，你会发现每一个设备状态的打印机已暂停和脱机，打印到打印机，但无论如何，SharePort软件检测到打印已发送到打印机，它打印机自动分配到您的计算机和打印机，而与您的电脑上会显示为连接，一旦打印作业已经完成，便会返回到脱机，沟通暂停。
此功能的局限是它只能在一台PC一次，USB设备根本就没有设计连接到2个，所以一次有意义的，为什么是这种情况。
我并没有作为，但是，他们已经知道这些事情的工作网络摄像头，但在1比正常速度慢，我的打印机扫描仪功能的正常工作，但是您必须手动连接使用SharePort软件使用它，一定要断开完成后。
正如我在本文的SharePort软件是我已经等了很长时间的启动表示，这是一个伟大的功能考虑我的路由器是不是现在最新那里，几乎看起来像友讯已成立了新加入它的特点，也显示了良好的设备可以工作，如果它可以处理一个USB设备，而这是执行所有它的其他职责。
相关岗位：
评论：
留下回复
日期：08年10月14号
时间：上午05时57分
刚刚升级我的迪尔655路由器固件为1.21。 当我开始安装SharePort实用程序坠毁我的台式和笔记本电脑是Windows Vista家庭高级版操作系统。 所谓友讯科技的支持，但没有发现任何问题。 任何人有同样的问题吗？ 由于在这个问题...请需要帮助解决。
日期：08年10月14号
时间：上午11时47分
嗯，我仍然在运行1.21版04，这可能是最后的1.21，也可能是从ftp://ftp.dlink.com/Gateway/dir655/Apps/SharePort_Network_USB_Utility_094一个好主意，重新下载该实用工具。压缩也可能重新闪光与或ftp://ftp.dlink.com/Gateway/dir655/Firmware/dir655_firmware_121_no_securespot.zip的no_securespot ftp://ftp.dlink.com/Gateway/dir655/Firmware/dir655_firmware_121.zip路由器文件具有比标准的1.21固件它新的日期。 什么样的软件，你目前拥有的计算机上同时运行？ 尝试两关掉在安装此病毒扫描等。
日期：十月16，2008
时间：上午04点56
我刚刚安装在我驻伦敦办事处处长固件1.13 - 4500，以及安装shareport实用工具。 Shareport不是recionizing我作为网络上的或我的外置HD路由器作为接驳。 有什么想法？
日期：十月16，2008
时间：下午6时44分
实际上，我试图去一个类似的问题，我经历，前几天我的电脑停止检测时，我的打印机上，是最底层的时间也没有检测到路由器的连接。
我重新安装了它，重新启动路由器，并没有改变，即使所有其他电脑作品完美。
可能的解决办法：其实我刚才已经解决了这一问题，它似乎是无法识别设备，当你有多个网卡启用，所以如果你运行VMware等你必须禁用收到其他网络连接并重新启动再次将开始检测。 如果你能得到它的工作从这个让我也知道。
日期：2008年10月18日
时间：下午5时54分
嗨！
显然对美国版655仅工作。 我添乱，固件到最新版本，欧盟不存在上述屏幕。
只是想清楚，这对美国用户只。 其他的人，不要误会，以为这个网络的路由器将网络接入以外的任何其他。
日期：2008年10月19日
时间：上午12时13分
该负责人感谢，我一直在使用我在非盟的固件版本，购买655美元。
我不推荐这样做，但我不相信有任何在不同区域的所有硬件都不同。
日期：08年10月20号
时间：上午05时35分
本教程为这个伟大的-用你的指示，我能更新固件，安装打印实用程序和打印使用我的路由器连接笔记本电脑谢谢！ 只是一个字的感谢。
作为一个参考，我用的D - Link路由器软件的自己的“检查更新的固件”功能，并自动推荐的版本1.21（日期为2008年10月9日）。 现在，我印刷hunky上的Vista鲂的笔记本电脑（康柏），和一个XP /家庭为基础的桌面（康柏）。 还有另一个戴尔笔记本进行连接。 打印机是惠普Deskjet F4180多功能一体。 如果安装SharePoint和笔记本电脑上的HP打印机驱动程序，但是这没什么大不了的。
一个区别我从你说的发现：我没有重新连接到打印机的每一次我使用它。 当我连接后，它一直保持连接，除非我选择“释放”了。 如果个人电脑的连接，并且您想要打印从一个不同的，它会为您提供了“请求从所连接的计算机发布”选项。 然后，当前连接的计算机收到一个弹出消息，要求其断开，使其他用户可以使用打印机。 状态栏还显示计算机的名称为准机是当前连接的积极打印机。 或许这是另一个固件更新是在08/10/09新闻稿？
作为一个参考，我是美国用户。
日期：08年10月20号
时间：下午12时34分
谢谢您的评论丽莎你，我很高兴你喜欢我的指示。
其实我从来没有来过这，我的所有计算机都设置为自动连接，使他们不仅关系到在将打印作业发送短几秒钟的打印机，然后再断开它，我想会的一部分我太但是我还没有碰到因为它没有连接到任何一台电脑足够长的时间再要求使用它。
日期：2008年10月23日
时间：上午07点48分
有肯定是版本1.2和1.21版本的迪尔- 655固件问题。
映射虚拟服务器无法正常工作的输出数据包。 我运行邮件服务器开始运作这两个固件转速间歇性。 恢复到1.11解决了这个问题。 连接到端口25（SMTP）将路由到相应的内部服务器在我的网络，但似乎服务器注册教育储蓄计划并不总是得到回到遥远的连接服务器。 剩下的SMTP程序等待更多的沟通来从未和超时。 有时，转递服务器将放弃和邮件丢失。
此外，日程安排，不能正确配置.. 固件错误地标记为无效，即时间：晚上11时至凌晨5点是1.2倍和确定无效1.11。
日期：2008年10月23日
时间：上午11时52分
这是非常糟糕布赖恩，我没有经历过任何与这些固件自己坏的，但其他人报告问题。 以前我曾下跌1.2很多人在与它的问题，但它似乎没有对这些问题都可能已得到修复。
日期：08年10月24日
时间：上午06点35分
我不知道你能为我测试的东西...可以尝试设置一个时间表，利用晚上11时至凌晨5点，看看它是否认为有效吗？ 这会告诉我，这是一个1.21什么的那只是与我的单位和固件问题具有普遍性的问题...。 thx
日期：08年10月24日
时间：下午4时47分
我遇到了同样的错误，似乎不喜欢在午夜延伸。 会发生什么事您设置的时间表从下午11点至12点和12点一到早上5点？
日期：2008年10月27日
时间：上午07时28分
我发现，法国网站，法国友讯代表声称shareport功能将在几周内推出欧盟固件：
http://www.clubic.com/actualite-170094-dlink-routeurs-dir-655-dir-855.html
在下面的文章评论的赛斯美国固件硬件工程欧盟罚款（如本说-可能有硬件没有差别），罚款shareport工程，以及佳能的多功能佳能PIXMA可以扫描通过共享端口。
我在DIR命令对我而言，655 ...
日期：08年10月28日
时间：上午二时03
@ 6（和其他任何人）...我也遇到了“安装SharePort”我的系统崩溃问题。 （的V 0.94和1.0版本）
在DIR - 655进去大，固件更新了罚款。 路由器/无线翻录快。
去安装软件和SharePort坠毁我的XP SP3和Vista家庭高级版系统，可怕的错误。 能够让他们将通过系统的恢复，但有一段时间不漂亮。
我怀疑与AVG免费8冲突是一种软件系统对我所有的共同一块。
其他人可能可以确认SharePort / AVG免费8驱动程序冲突谁可能已经坠毁在他们的系统/安装后SharePort？
-干杯
日期：08年10月28日
时间：上午7点35分
嗯，我已为6月同样的问题。 共享点版本1.0崩溃，我的笔记本电脑在安装和卸载。 我已经固件1.21，但我不认为事情，因为我什至不能崩溃的情况下安装软件。 所谓友讯的支持和他们说Sharepoint和USB端口上没有迪尔- 655的支持。
可能会寻求替代产品，能够正确地支持一个硬盘驱动器。 任何建议？ 我可以尝试苹果机场Extreeme现在也是千兆和双模能力。
日期：08年10月28日
时间：9:30 pm
我几乎可以肯定在我的案件之间存在着的SharePort驱动程序和别的驱动程序冲突。 我强烈地倾向于在这个被一些有利于制度保障，对我来说，（HIPS的？）的AVG免费8个功能。
在试验台系统，我可以只安装SharePort罚款（第五.94或1.0）。 但是如果我必须首先安装AVG免费八日在安装过程...或者当一个驱动程序或服务尝试结束机器蓝屏安装。 奇怪的是，在一个“真正的”系统上的坦克在安装在一个虚拟的系统，它只有坦克卸载期间SharePort与AVG免费8。
但是，（在虚拟系统），如果我先卸载AVG免费8，重新启动，安装SharePort，重新启动，然后安装AVG免费8一切似乎乐于合作。
我需要做更多的故障排除先我谨以我的“活”的系统。 这一点意思都没有做系统恢复两个出我的三项制度本周末。
我不认为这是一个router-hardware/firmware问题，因为照我可以告诉。 我迪尔- 655，如果抓取速度和固体。 我没有升级到1.21固件使这一新SharePort功能，但我看不出如何路由器固件影响的系统。 我深信它与SharePort软件本身，特别司机或服务的安装初始化冲突。 我只是要牵制的冲突点。
是的...我花了30的支持与友讯昨晚的电话分钟，这是毫无价值的旁边。 我终于穷人高科技升级我的调查结果向一位主管，也许它将使位于友讯技术办公桌。
根据这个家伙，没有新的“后室”版本，在这个时候SharePort可用。
将让你知道我知道。
否则，我一直很高兴与Dir - 655设备的整体。 太糟糕了SharePort特点是与该模型将决定因素之一。
唉...。
（BTW，我张贴了上述SteveW的上述评论的权利...我不知浏览器被困6月在作者字段的名称。）
-干杯
日期：2008年10月29日
时间：上午02点44
这是很好的解决问题方面有圣诞老人，这将是一个肯定，也许AVG是没有发挥好要么SharePort软件问题，但也没有完全得到最佳战绩，最近就与其他软件的问题。 我会看看我是否能发现任何关于明天的AVG / SharePort，我相信这些公司的人知道的东西。
我不希望友讯更新了一段时间的软件，但我猜他们只知道肯定。
如果足够多的人希望有问题的，但他们会很快解决，软件本身已经与所有的硬件和SharePort能力有相当一些人在那里了。
到了我已经改变上述SteveW评论你的名字的方式，使谈话可以得到正确理解，让我知道如果您遇到系统错误的意见，这是我的代码，以便它有一个错误的可能性。
日期：2008年10月31日
时间：上午08时34分
我也安装在我的迪尔1.21 - 655和USB软件。 我的硬连线的电脑，打印机立即发现。 我的笔记本电脑（无线）sharport说，找不到USB设备。 有什么建议？
日期：2008年10月31日
时间：上午10时20
尝试禁用任何其他网络卡并重新启动，甚至是以太网卡，Shareport陷入混乱的多个网络连接容易，如果它运行VMWare的尝试禁用VMNet网卡。
也暂时禁用您的防火墙可能对公正的情况之一是阻止了连接笔记本电脑。
日期：2008年11月2日
时间：上午10时51分
作为Valca具有相同的问题，但我运行的，所以我想知道，其他的一些东西，然后病毒扫描新的诺顿病毒扫描。
日期：2008年11月3日
时间：上午04时14
嗨。 仍在测试的问题。
我以前曾怀疑的AVG 8所以这个周末，我发现了一些自由活动时间。 决定把我的Vista家庭炳廷我的理论测试。 SP1系统。
余卸载的AVG 8，提出了手动还原点（我是件好事）重新启动，到目前为止，一切顺利。 然后我安装了SharePort。
蓝屏。
系统还原使用我节省点恢复我的系统。 现在，我又回到了起点。
转移到了一个新的虚拟PC会话使用质朴的XP SP2的安装。 安装SharePort得很好。 没有问题。 卸载它只是罚款。
下一步怀疑我是NetLimiter监视器这也是我在所有三个系统普遍。
安装NetLimiter监视器和重新启动。 良好的。 没有稳定的问题。
去安装SharePort（1.0），在接近年底的安装...就像我真正的系统...虚拟系统没有立即黑色屏幕重新启动。
Hmmmm。
因此，我已经卸载从我的系统监测和NetLimiter放在一个电子邮件查询，以支持球队询问他们是否能够独立地研究这个问题。
眼看似乎都SharePort和NetLimiter监视器似乎都钩到Windows网络驱动程序/服务这使得相当不错的感觉。
将另一个更新，如果/当他们回应。
不知道我是否还勇于只是重复我的生活系统的实验。
，干杯！
日期：2008年11月3日
时间：上午7时27分
大家好，我是全新的这一切。 最近升级的DIR655。 伟大的。 1桌面5的笔记本。 桌面的PCI网卡，路由器，DSL调制解调器等的笔记本电脑都运行的内部802.11g设备。
如果我拔掉Oki550从桌面彩色激光的USB线，并插入USB端口DIR655它。 这是最终（或理论）将允许我们为打印，激光没有电脑桌面上的第一个转折点？
现在这是我的最终目标，这是我第一个问题。
谢谢
戴夫
日期：2008年11月3日
时间：下午3点10分
是的这将使访问打印机任何时间上的路由器，打印机和路由器是唯一2事情，必须对这项工作，但他们就是不提供通过桌面在任何阶段的路线。 可以看出你的意见，应行使在此提醒一下安装时Shareport软件，因为它没有发挥与其他软件具有良好的网络组件。
日期：08年11月4日
时间：下午6:30
嘿家伙，我发现这个问题...它的净限制器卸载的，你是好去^ _ ^
日期：2008年11月6日
时间：上午12点零一
本，
只是为了证实我怀疑和尼克已确认的净...限2监控程序不严格的SharePort应用（此时）冲突。
我从我卸载XP家庭版（SP3）和Vista家庭高级版（SP1）的系统中。 然后我重新安装后创建系统还原点SharePort（为了安全起见）。
安装好了这个时间，也没有蓝屏死机或冲突的观察。 该SharePort应用很快找到了希捷公司的USB闪存设备，我能够“安装/连接”，它的读/写的所有系统文件。
首先要明确的...只有一个系统可以连接在同一时间，据我可以告诉该设备。 除此之外，现在工作得很好。
噢！ 这是一个doozie工作这个问题了。 投寄确认感谢尼克。
我发电子邮件到网络限制器有关问题的支持团队，但没有回音。
不知道是否会发生的所有的（已付/程序免费）或只是与净限制器2监视器。
谢谢大家！
干杯！
，克劳斯五
日期：2008年11月7日
时间：上午12时34
您好，我是拥有迪尔为我亲爱的老迪尔855 - 655去作永久性的解决我的姐妹的公寓。 不过我会很有兴趣知道，如果在DIR - 855支持该功能也。 这可能是一个很好的补充，我已经真棒无线路由器上。
丹尼尔
日期：08年11月8日
时间：上午06时13分
丹尼尔，
据友讯新闻稿，在DIR - 855是在那些SharePort支持包括在内。
http://www.dlink.com/press/pr/?prid=442
报价：
“创新SharePort USB网络桥接功能可在D -连接极限N千兆路由器模式-在DIR - 655，迪尔- 825，迪尔- 855和驻伦敦办事处处长，4500 GameFuelâ”─游戏路由器。 该SharePort技术升级也可于依赖RangeBooster N迪尔- 628。 这些路由器当前的业主将可通过下载升级最新的固件和从D端实用工具SharePort技术链接网站http://www.dlink.com。“
我认为这是对迪尔- 855固件和SharePort下载页面链接：
固件-
http://www.dlink.com/products/support.asp?pid=548&sec=1＃固件
（这是一个好看的全程855模式。让我看看平原655！
祝您好运！
克劳斯五
日期：08年11月8日
时间：下午9时41分
您好，我有一周我自己DIR655。 它是欧盟的版本，但美国固件1.21运行smothly。 Shareport的作品，但不是很稳定。
第一个问题，用户通过无线USB磁盘驱动器是不是一个好主意恕我直言。 任何网络问题和Vista有问题的设备。 还表现是一个问题（800kB /秒时，200万/秒，当复制文件与无线N适配器）之间的笔记本电脑。
但我在购买该打印机共享路由器。 ，这是可能的，但Shareport实用工具（1.0）仅适用于本地帐户。 当Active Directory帐户的工作，实用的弹出窗口显示连接到路由器的USB端口的设备。 但是，当单击托盘图标应用程序窗口不显示。 应用程序在任务栏上，但没有选定窗口的设备并连接。
在本地帐户一切正常。 似乎是SharePort实用程序的问题。 安装操作系统的一个星期前，没有安装很多aplications。
任何想法？
彼得亚雷
日期：08年11月9号
时间：上午08时十八分
克劳斯，非常感谢你，我是从这个问题到现在的痛苦。 我花了整个周末，我没有什么，谢谢！
这个网限制器吸：\
日期：2008年11月10号
时间：下午1点27分
你好，我是有这个与友讯655 v1.21手机isue
和shareport v.1.0 ...
multifuction打印机和USB闪存驱动器的工作完美无瑕2 XP SP3的，1远景64台，
但是，当我连接一个诉2.0 iPod的触摸，实用的shareport显示“可使用”
并尝试连接到它，我所有的PC的下降的互联网连接，无线和硬的不用说，iTouch的wont和因特网连接自动恢复3，如路由器会进入电源周期或东西。
后来我试图用同样的程序，但iPod nano了这个时候，你猜怎么了，工作的完美！
有没有人有这个问题，或知道的解决方法呢？
日thanx for你的帮助。
日期：2008年11月14号
时间：下午1时29分
吃了吗？
所以.. 我有一个迪尔- 655欧盟路由器，并试图在美国1.21固件自己。 我不会说谎，固件升级的表现没有那么顺利。 当我上载固件到路由器，我无法到达路由器的管理页面后，再...但在复位一切都恢复正常（可能是一个好主意保存路由器的配置之前，你这样做固件更新）。 反正，我鼓励了非美国迪尔- 655尝试1.21固件...到目前为止，一切都运作良好，管理的重视，甚至我的打印机给它的，非常棒...接下来要尝试的人都存储设备
日期：08年11月15日
时间：下午10时16
记住球员，路由器似乎仅限于USB 1.1的速度，即约1MB/second所以不建议，除非你有一个小装置，并没有太多的转让，也路由器并不是最快的系统，使数据传输通过USB可能提出了在设备上，它可能导致的较慢的无线局域网的速度和辍学任何路由器重新启动带来了很大压力。
感谢您的研究圣诞老人，希望不久的公司之一，你能解决兼容性的问题。
日期：2008年11月26日
时间：上午03点22
我希望你能帮助我的另一个问题。
我最近升级到另一个D - Link路由器的迪尔- 655。 升级到F / W型1.21。 对本地网络工作组的多台计算机都看到与旧型的路由器相互罚款。 现在我cannot看到局域网上的其他任何一台机器。 我知道我已经错过了一些简单所以我希望你可以给我一个头了。 所有节点看到互联网罚款和IP的是保留的DHCP范围之内。 我错过了什么？ 许多感谢
日期：2008年11月26日
时间：下午1点25分
有2个关闭我的头顶有东西在移动网络的问题，主要是网络的变化时，它的IP安排，一些防火墙软件，包括Windows防火墙和一般ZoneAlarm仍然可以阻止被'电脑发现的'，因为它认为这个新网络是一对，而不是私人局域网互联网公共网络，如果您正在运行Windows Vista同样的事情都可能发生，请确保您的电脑有自己的网络连接设置为家庭或私人，那些真正的应该是唯一的时候，这个问题应发生。
如果是无线也确保无线分区是在先进的无线性能的残疾人，因为这将导致类似的影响。
日期：08年12月11日
时间：上午10时55分
我在Vista上具有相同的蓝屏死机问题，因为其他人提及。 个人电脑到在Shareport年底蓝屏死机安装，然后BSOD'ed每次我试图登录。 我趋势科技AV和北电的Contivity VPN客户端。 两者都是重要的程序，我也无法卸载。 既可以对这些有问题呢？
日期：08年12月18日
时间：下午11时01
嗨，
我感兴趣的是该路由器升级，所以我重新寻找线索不同的论坛。
今天，我发现有一个新的（仍然支持3G网络）文件的更新12.12.08。 任何人进行审判，如果这是一个修复或没有新版本？
日期：2008年12月19日
时间：下午2时57分
我给它一个尝试，看看是否有什么变化的基础上有问题的人，关于这一点的新问题我注意到出现了，有时后一个多星期，在所有电脑上shareport软件开始的路由器提供了连接错误，如果他们一段时间，可以在屏幕上数百名，重新启动路由器停止了一段时间的错误离开。
日期：十二月20，2008
时间：下午6时52分
1.21是作为一个被释放，几个月前，刚刚的日期改变，但大约2或3的版本已经没有一个测试标签标签1.21与1.21的最后一个是在11月B10号相同，所以如果你下载的1.21或更早的10月，重新下载并安装，它修正了端口转发和节能设置的几个问题。
日期：08年12月29日
时间：上午06点59分
喜刚，
大线！
我有一个shareport问题，并想看看是否有相同的经历。
这是我的设置：
1。 迪尔- 655的固件1.21
2。 温XP专业版机（作为VMware的客户端）与shareport 1
3。 西部数据外置HDD
该硬盘插入到路由器上的USB端口，但我无法连接从亲的Win XP的机器了。 在XP的机器会不断通知我，它已“发现”的硬盘，但Shareport托盘图标继续保持红色，决不变为绿色。 大约30秒后，该通知将回来。 我完全不知所措，因为它过去workeed当我在另一台主机这个虚拟机客户端。 我知道这可能导致VMware的这一点，但我不看，因为我只有一个网络适配器XP机器上启用（以太网桥接）。 我花很多时间，得到这个工作...任何想法将不胜感激！
谢谢，
约翰
日期：二〇 〇八年十二月三十日
时间：上午08时02分
我有这样的设置迪尔- 655固件1.2.1和Shareport我得到的工作，如果禁用我的Microsoft OneCare防火墙。
有谁知道港口的使用由D -连接SharePort？
日期：2008年12月31日
时间：上午12时08
如果你都去友讯的路由器的网站，您将看到它说，
“这固件设计只为美国产品。
在设备上使用以外的美国这一固件将您的保固无效，并可能导致设备无法使用。
请联系的D - Link在您与您的D - Link电子兼容的固件更新地区办事处。“
和，
“¤新增SharePort功能。
¤固定电子邮件通知的问题。
请下载SharePort工具，看到了SharePort使用前手册。“
你必须下载工具的实际使用它！
日期：2008年12月31日
时间：上午12点10
哦，我差点忘了，这是x86版操作系统唯一的。 X64的不支持。
日期：2009年1月2日
时间：上午03点12分
您好詹姆斯，我不知道自己的端口但是如果你打开一个命令提示符并使用命令'netstat'只是试图连接后使用Shareport，为路由器的IP看看，你应该能够看到所有端口个人电脑连接到的路由器，OneCare的可能有一个日志文件，可能会让你做同样的事情，只要确定你尽可能少的网络作为清单可以得到相当长的时间和运行的应用程序做没有任何P2P程序在当时运行的是。
您好乔迪，我已经测试版0.94和1.00版本在Windows XP x64和Windows Vista x64的，并没有任何问题，有一个64版本，不容许这种运行？
日期：2009年1月7日
时间：下午5时38分
我刚一友讯DIR628也是具有shareport实用工具。 不过，我有一些很奇怪的问题，不知有谁可以提供一些帮助或建议。
在我妻子的Vista笔记本电脑，网络的shareport的USB实用工具安装顺利，工程很好。 在我的XP专业版的桌面，在第一次安装鸿，当我重新启动，该网络的USB工具开始，但看不到后面的路由器设备。 我一直在尝试不同的防火墙设置（并最终关闭所有的防火墙只是为了尝试）在过去数天而且似乎没有任何真正的工作。
唯一似乎工作是，如果我卸载shareport实用程序，重新安装它，然后第一次开始了重新安装后，我可以看到设备。 如果我离开了，并重新启动该实用工具，它是同样的没有看到任何设备的老问题。 重新启动也有不相同的问题视而不见。 唯一的办法才能正常的工作，到目前为止，似乎是卸载，“重新启动，”重新安装，而且只有在该序列工作。
任何人有什么这个问题可能呢？ 当它的工作，它的工作很大。 我是从一个外置的HD 80 Mbps的这不是很好，但是也不错。 我还可以把我的两个打印机和多功能一体机背后的枢纽和他们两个人进入房屋。 这真是美妙的方式。 我只是希望我能得到它的工作，我所有的计算机。 顺便说一下，我的其他系统是一个Mac和苹果还没有推出该实用工具的版本。
对长期邮件，任何帮助或建议，遗憾的是真正的认识。 谢谢。
日期：2009年1月7日
时间：下午6时36分
我看到了那里的设备，不能随意在电脑上发现少数情况，但是我没有经历过在PC上后，每次这已安装。 是电脑能够侦测路由器使用Shareport工具？
Right click on the Shareport icon, in the menu you should see the name of your router and it's IP address, make sure it is selected, if not go to it and a new menu will open up, make sure you click on Enable, also you can click on Configuration to get some advanced settings.
If the router doesn't show up in the list then there may be some connection settings on that PC that are limiting the connection between it and the router.
I'm also waiting on a Mac version of the software, though I think it might not happen any time soon.
Date: January 8, 2009
Time: 4:19 am
Anybody use a USB hub on the shareport and get more than 1 device to work?
Date: January 8, 2009
Time: 5:21 am
Ben – thanks for the response. The PC that I am problem with is directly connected to the route through a wired connection using a CAT5 cable. It is the primary system that I use to set up and configure the router. When I had the problem, the top line in the right-click screen of the shareport icon, the one showing the IP addresses and things was not visible. I only got things from the “Advanced Options” down.
Mike – I did put a USB hub in and connected a Canon MP470 printer and a external HD at the same time. I was able to see both of them and were able to connect to them from my Vista laptop.I didn't try to read/write to the HD and print at the same time though.
By the way, I made a typo earlier. I think I was only getting 8 Mbps, not 80. So roughtly 1 MB/sec read throughput is what I was getting. Not very fast but good enough to move small amount of data.
Date: January 8, 2009
Time: 10:28 am
I'm having the same trouble: Have a Dlink655 with a wired connection to a Vista Home Premium laptop and an older desktop box running Win XP.
Shareport works just fine on the laptop – I want to use it for a shared printer.
I can install shareport fine on the XP machine, but it doesn't find any devices connected… and I also don't see the router's IP address upon right-click. I disabled firewalls, uninstalled antivirus software etc. but to no avail.
Would love some hints if anyone has them!
Date: January 8, 2009
Time: 2:42 pm
To Jacko
I went into admin, clicked on ADVANCED, then WISH on the left, then I made sure it was ENABLED and for PRIORITY CLASSIFIERS I clicked AUTOMATIC. Try it.
Date: January 10, 2009
Time: 4:44 am
Mike – you said you “went into admin, clicked on ADVANCED, then WISH on the left, then I made sure it was ENABLED and for PRIORITY CLASSIFIERS I clicked AUTOMATIC…”
I assume you are talking about the web administration page for the Dlink655 router? What is the “WISH” thing you talked about? I have a Dlink628 and I didn't see anything that looks like “WISH” in the advanced menu. I was wondering if you can explain what that menu does, I might be able to find the equivalence in my router. 谢谢。
Date: January 10, 2009
Time: 3:04 pm
I've checked out the DIR-628 emulator on the D-Link site and it appears that router doesn't have WISH at all, perhaps you could try messing about with the QOS settings as they are similar to WISH except they affect both wired and wireless on the WAN side of things, but may not have the same effect as WISH, personally I have WISH off and have no problems.
Date: January 12, 2009
Time: 1:45 am
大家好，
I tried changing the WISH settings, but no luck. The Vista laptop has no issues with Shareport at all, whereas the XP machine cannot even recognize the router.
If the issue is router-side, I don't know why the Vista box would work and the XP box not?
Thanks!
Date: January 12, 2009
Time: 2:25 am
Hey guys, i am seeing the same thing on the dlink dir-825. Wireless PC's see my printer connected to the usb shareport fine. My wired PC's lose the printer whenever they are restarted. If i reboot the dir-825 the wired pc's will see the router again.
When I click the sharepoint icon, I see the ipaddress for the router when it's working correctly with the printer. When it's not, the ip address is not there and the first entry is advanced options.
I tried changing the wish settings but no change….
Date: January 12, 2009
Time: 4:38 pm
Hi Jacko and hoc, are either of your PCs that have this problem set to connect to the router via DHCP or via menually entered static IPs?
Date: January 13, 2009
Time: 3:10 am
嗨
Both my laptop (Vista) and desktop (XP) are connected by wire to the router, and both are set up using DHCP.
Thanks!
Date: January 14, 2009
Time: 3:14 am
I talked to dlink 3rd level today who was passing this on to the product manager. I need this to work so have done a good amount of testing. My PC's are all connecting via dhcp, all vista (some x32 and some x64).
From the testing here i have found that the wireless PC's always detect the printer connected to the shareport. The wired PC's are inconsistent… at best. If I reboot the dir-825, the wired pc's will immediately detect the shareport printer and keep it until the network connection is interrupted. If i pull the network cable on the wired pc, and then plug it back in, they will lose the printer and not re-establish it (exactly what happens when you power off your PC).
Hoping we can come up with a better solution than rebooting the router every day!!! I'm sure linksys would like to hear about that.
Date: January 14, 2009
Time: 7:14 am
hoc,
I think you may be on to something. In my set up, the system that has problem seeing the network USB port is connected to the router through a CAT5 directly. The laptop using wireless connection has always been good. I have an additional variable in my environment on the OS used. The wired desktop uses XP while the wireless laptop uses Vista.
I installed Windows 7 Beta on the wired machine over the weekend. I was again able to see the printer on the network USB port upon first start of the utility. When I exited out and restart the utility, I had problem again. I will try rebooting the router when I got home tonight.
Date: January 17, 2009
Time: 2:23 am
I am getting a 'Connection failed, please try again.' message every minute or so from SharePort Network USB utility.
It's odd because I have my printer on the USB port and it works fine.
Any theories on where to look??
Date: January 17, 2009
Time: 3:24 pm
I get that too on every computer other than mine, strangely uninstalling/reinstalling doesn't fix it either, the only thing I did was upgrade the firmware, my computer installed SharePort after the firmware upgrade yet the other PCs have had it installed since before and they experience the problem.
I can't see any link between the Operating System they were running or the firewall/antivirus software either, what I have done is turned off the startup option in the program and run the programs only when I need to print.
Date: January 18, 2009
Time: 7:18 am
Can anyone recommend a setup for allowing a mac and a PC to access and use the same external harddisk over a network? Or where I can find info on this? Here are the challenges:
- Both PC and Mac are a bit old, so no N-standard
- Formatting of disk: has to be HSF+ and PC will use MacDrive?
- Considered buying an entertainment PC and use this as “Server”
建议？
Date: January 19, 2009
Time: 9:49 am
Dlink released an update to the sharepoint utility software this week. For my wired pc issues it does help, but is not a complete fix.
At start-up my wired pc doesn't see the printer connected to the shareport. In the 1.0 version, the dialog box for the utility started with “advanced options”. Now it starts with the address for the router.
I can force the utility to see the printer by selecting disable and then enable in that shareport dialog. Still not a complete solution but getting better…
Date: January 22, 2009
Time: 1:38 pm
Shareport is not finding my router in the pop up menu from the system tray icon. I have the DIR 655 and a vista x64 OS. Dlink support stated that shareport does not support 64 bit vista OS but posts here seem to contradict that. Any recommendations, advice would be much appreciated.
Date: January 24, 2009
Time: 12:49 pm
I installed Shareport 1.14 and it works better, although when I disconnect from a hard drive it says it's busy and should I force or cancel. Force seems to work and I can re-connect ok
Date: January 25, 2009
Time: 8:29 am
I've just upgrade my firmware and everything work's fine. I've test USB HDD and USB Printer both work fine. I'm pleased with DIR-655. Real cool
Date: January 25, 2009
Time: 2:00 pm
Finally got second laptop to connect to printer hanging off DIR-855. The cuplrit was OneCare – thanks James 30 December. Once One Care Firewall was disabled my Shareport icon turned green and the printer was able to be used. Only took me a couple of days and many grey hairs !
Date: January 26, 2009
Time: 12:18 pm
大家好，
I setup the DIR-655 for a friend – one older desktop with Windows ME and a new laptop with Vista. The desktop is wired to the router, the laptop is wireless. I installed Shareport and hooked up his printer to the USB on the router. It worked! for a few days. Now the printer seems to have disappeared…. sort of. It's not listed in any application, but if I click on the Shareport Utility, it says the printer (a fairly new HP) is available. There's got to be something I'm missing here. Anyone know?
(For now, he's not trying to print from the desktop, but I was thinking a usb hub would allow me to hook the printer to the desktop as well as the router.)
谢谢
Date: January 27, 2009
Time: 4:37 am
Oh well, I went to my friend's house and everything worked fine… of course! The printer was available and I clicked Connect and it connected. It did reinstall the printer driver. Who knows what he did — he did say he'd been turning. So maybe when I rebooted, it got straightened out.
I am still interested in using a usb hub so his desktop is wired to the printer. So, if anyone has done that and has any “gotchas” to warn me about, I'd appreciate it. I'm thinking printer to hub and hub to desktop and hub to router.
谢谢
Date: February 1, 2009
Time: 3:01 pm
Just got a DIR-655 last week after all the good reviews. I downloaded the SharePort fw 1.21 (2008/10/09). I'ma bit disappointed with it. Wanted to share some of the issues I'm seeing perhaps you have solutions to share;
- Clients (3x Vista Acers, & XP Pro Lenovo) have hard time getting an IP address with WPA-personal, and WPA2-personal after wake-up. I must have the laptop try few times until it succeeds. They worked quite fine with cheap Belkin 802.11g routers
- Connection drops even though signal is in the 85% or greater most of the time
- Finally, I bought this when I heard about the SharePort fw. This feature was a big disappointment. I thought it may work as a printserver, but clients have to request and grant the connection before use… very stupid when no one is using the already connected client! – Also, if the laptop sleeps, the connection gets stuck and a USB disconnect/re-connect must be done for the printer to be re-discovered. Lastly, my Canon MF MP830 is not happy with it. The print preview doesn't work anymore, the printer doesn't wake up on jobs, and the jobs error out frequently.
Date: February 3, 2009
Time: 7:14 am
having the same issue as this guy below is telling every thing is ok but when i click on the utility on task bar nothing flashes on desktop.it work well on my other computer running vista 32 home premium , it was doing good on this system too but i don't know why it start acting up like this.this is vista 32 ultimate any suggestion guys would be appreciated.
“Author: Pit
Date: Nov 8, 2008
Hi, I have my own DIR655 for 1 week. Its an EU version, but US firmware 1.21 run smothly. Shareport works, but not very stable.
First issue, sharing USB disk drive over the WiFi is not a good idea IMHO. Any network problem and Vista have issues with device. Also performance is an issue (800kB/s when 2M/s when copying files between laptops with WiFi n adapters).
But I purchased this router for printer sharing. And it is possible, but Shareport Utility (1.0) works only on the local account. When working on the active directory account, the utility's popup window shows the device connected to the router's USB port. But when clicking on the tray icon the app window is not shown. Application is on the taskbar but has no window to select device and do connect.
On the local account everything is OK. Seems to be the SharePort Utility issue. The OS was installed a week ago, not many aplications installed.
“
Date: February 3, 2009
Time: 7:17 am
forget to tell in above post im using Dlink-655 with firmware 1.21 (latestone) and share port utility 1.14. hope that u guys will provide some assistance on this issue.
Date: February 3, 2009
Time: 11:37 am
For KingTut: I have a similar problem on my laptop, the problem is caused by the channels the router is using for wireless, sometimes it will get out of range of standard wireless cards, even my laptop's N card doesn't work properly sometimes, try forcing the wireless channel to something like channel 6 for a while and see how it goes, you can also try having the channel set to 20Mhz, not 20/40.
For bally: It's possible SharePort needs certain permissions to run properly, it may be a good idea to get in contact with D-Link so they are aware of this issue, it could be a bug that they are unaware of as of yet.
Date: February 5, 2009
Time: 5:15 pm
Just installed the latest firmware for DIR-655 and Shareport on three Vista and three XP Pro SP3 pcs. The vista pc's are both wired and wireless and works fine. Te XP pc's refuse to find the router (all three wired). What more is that the Shareport uses up all CPU power when I try to exit the application. There is definitely problems with the software. All firewalls have been turned off. The XP machines have different Anti virus (AVG, Avast and Norman). One of the XP PC's are connected directly to the router, two through a access point. Changing channels or stopping other applications using communication ports have no effect. The Shareport has been tested 0.94 and also updated to 1.0 and tested with clean installations. If anyone is able to run Shareport on XP, please explain how it was installed. Also try Exiting the application and check the CPU meeter.
Date: February 7, 2009
Time: 8:41 am
dlink support q-less regarding active directory matter. even no reply for 4 days upto now. WTF Support they r providing . just dont even know what the thing is
Date: February 11, 2009
Time: 5:22 am
Just wondering out loud: do you think that it would be possible to use DIR-655´s USB port for something else then sharing a printer?
It certainly doesn´t sound to be good enough for usb-hdd´s for very low transfer speeds that´s been mentioned over here.
Could it be used for hosting a very small web server from an USB stick, like a static home page?
Date: February 12, 2009
Time: 12:02 am
I have the same problem after install all my laptops, Vista and XP starts to crash and no one could reach the printer plugged in the USB port….
Date: February 13, 2009
Time: 7:03 pm
I think i have a different problem here.. i connected a usb hard disk on the usb port of my dir-655 (1.21 firmware) and installed the shareport utility on my vista32 and xp sp3 computers.. I get no router name when i right click the utility in the system tray so I can't select any usb device from the router.. By double clicking the utility, i get no detected usb device in the utiliy's panel either.. I even tried without wirewall, to no avaqil.. what's up with this?
Date: February 13, 2009
Time: 7:07 pm
..also, whenever i boot vista32 i get a 'new hardware found' message and the request to install drivers for the router.. except that there are no drivers in the cd that came with it or on dlink's website… any suggestions? (by the way, the router works, as I can connect wireless and share my internet connection..)
Date: February 13, 2009
Time: 10:55 pm
For Stefano:
Try downloading/installing SharePort again, the drivers are a combination of generic drivers that Windows should already have and 1 or 2 that should be installed with that setup program.
Looks like the program has installed but has been unsuccessful in installing the drivers for some reason, it is most likely that the setup program has exited and deleted the required driver files in the temporary directory before it has had a chance to install them.
Have you V-Lited or stripped down your Windows XP cds in any way? Sometimes removing inbuilt drivers stops less common drivers that some hardware needs.
For Gustavo:
Unfortunately this software and the drivers don't play well with other software and drivers and there is so many possible incompatabilities, it crashes many computers with seemingly no reason.
If there is any software that is installed on those Laptops however unconnected they may seem to the problem, try removing them temporarily.
For Mika:
I don't think there's much chance of that being possible until they create some sort of interface that allows the router to use the stick for storage so it can run an additional server, then I think the router may not have the processing power needed for such a task.
For Bally:
This would be more of an additional feature in D-Link's eyes, they would have no obligation to get it working correctly, it's just the way those companies work, they don't get much more money on additional functionality such as this so it's not really worth their time.
For GC:
I've never experienced cpu usage issues at any time with SharePort on XP or vista, using different virus scanners or wireless/wired, or even through another access point, I actually have the program set to not startup as it has all sorts of problems when it's allowed to run all the time.
My installation was fairly straight forward so it probably won't help you much, double clicked on the install file, installed with default options and when it was done restarted.
FOR ALL:
I had problems with the program telling me the usb device was connected, then not every 10 minutes or so, then when attempting to use it it would disconnect each time, seems that the router no longer liked my usb extension cable, so I removed it and all is good now, so try changing usb cables when things don't work out properly.
Date: February 14, 2009
Time: 11:44 am
for Ben.
Thanks for the answer… my xp install is fairly clean, so i don't think it has any problems.. also, i didn't detect any problems while installing the shareport utility in both computers, so i find it hard to believe it's a bad installation.. i'm clueless..
Date: March 2, 2009
Time: 11:31 am
Hi Ben, what version is your router? AU or US? Have you tried 3G USB modem on your router?
Date: March 3, 2009
Time: 5:47 pm
Getting the same issue with my wired connection to the DIR-655, Shareport software works after fresh install, connects to the printer shared through the router, but only until the first suspend or reboot, then Shareport no longer detects the router. I'd rather not have to uninstall and reinstall the software every reboot. 任何想法？
Date: March 4, 2009
Time: 10:02 pm
Hi Adam, I have the AU version router, I have no idea what kind of 3g usb modem they are referring to and have none to test anyway other than my phone (which I assume doesn't count).
Edward, I'm not sure what is going on with that issue but hopefully D-Link fix it as more than a handful of people seem to be experiencing it.
Date: March 6, 2009
Time: 11:35 am
大家好！
I just read most of this comments here, but it seems that I have diffrent kind of problem. Although I know that D-Link DIR-655 is exellent, I am thinking to buy DIR-855 or DIR-825 which are DualBand. I have TOSHIBA Qosmio F50-10K, so inegrated wireless card uses Atheros AR9280 chipset.
1。 Can somebody tell me does my wireless card support 2,4GHz and 5 GHz simultaneously?
2。 Which D-Link wireless Router should I buy?
Thanks for any comment!
Date: March 6, 2009
Time: 3:43 pm
Hi Jerry,
Your wireless card supposedly does do 2.4ghz/5ghz simultaneously, though I would check with nay documentation that came with it just to make sure.
I'm not too sure about those 2 routers as I have not had any experience personally with any of them, however I have heard that the DIR-855s have all sorts of issues, however we hear of all sorts of issues with the 655 so it really depends on what kind of bugs you can handle. If you want you can even go for another brand such as Linksys, their routers have great reviews lately.
I forgot to mention before for DIR-655 users:
There is a new beta firmware out called 1.22b05 , a significant portion of users have reported that it works great, much better than their recent releases, however this is a beta so be careful and don't install if you're worried about voiding your warranty etc, if it does fail and you're running the beta firmware they are likely to say no to a warranty replacement.
Date: March 6, 2009
Time: 3:47 pm
杰里，
I bought 2 of the DIR-825 routers. They do simultaneous 2.4GHz and 5GHz, which is why I wanted them instead of the 655.
I am having trouble, though, in getting Shareport to recogni the router on my Vista Ultimate system.
Date: March 7, 2009
Time: 12:30 am
I have Blink as my Security software and there's a conflict with eeyet.sys driver of Blink (EEye).
Would it help to uninstall Blink, install shareport and reinstall Blink or will i always get the conflict between the drivers!
谢谢
Date: March 7, 2009
Time: 2:58 pm
Hi Sebastien, You will probably always get conflict with that driver, unless SharePort is updated by D-Link to stop conflicting, or if the security software company changes how it works.
Date: March 25, 2009
Time: 11:40 am
I have a laptop computer running Vista home premium and Windows Live OneCare for a firewall. I installed the Shareport software for my new 655. As long as I have the firewall turned off, the software works. I am using version 1.00 of the USB Network Utility. Can anyone identify the ports I need to enable to pass through the firewall?
Date: March 26, 2009
Time: 7:12 pm
Well I'm not sure the specifics but…
It uses an open incoming port at port 9303 using the UDP protocol so try opening that port on the firewall.
It doesn't appear to do any other activity incoming or outgoing so I'm assuming that's all you need to fix.
Date: April 9, 2009
Time: 8:29 am
So with share port i have to decide either having internet security on my network or a usb device is that what i'm understanding and expiriencing with trend micro
Date: April 9, 2009
Time: 1:00 pm
I'd stick with security
日期：二〇 〇九年四月十一日
Time: 2:57 pm
喂！ I got another problem. I got d-link dir-655 Firmware 1.21EU and Hardware version A3. I have installed drivers for printer and shareport. The pc with wired network/cable found the printer on shareport, but the wireless/cableless network didnt found the printer. 为什么？
Date: April 13, 2009
Time: 12:42 pm
The DIR-655 is a great router, but the shareport utility is absolutely the worst piece of garbage I have ever had the displeasure of using. It is flaky at best…sometimes it works fine but most of the time it just simply doesn't work. If they are going to release this feature, they need to ensure it works. Otherwise it just serves to frustrate users.
Date: April 16, 2009
Time: 9:52 pm
There is a new version of SharePort (in a way, it has a lower version number but is newer), also there is now an OSX version out.
Date: April 18, 2009
Time: 1:51 am
I have a DIR-655 router and have been trying to get the Shareport utility to work. I have three computers in the network: a laptop with Vista and two desktops, one Vista one XP. The laptop uses a wireless connection and the two desktops are hooked to the router with ethernet cable. The laptop and the XP desktop work fine. But the Vista desktop only works sometimes. It's really random, sometimes the Shareport utility recognizes the printer plugged into the router and sometimes it doesn't. 有什么想法？
Date: April 18, 2009
Time: 12:33 pm
I'm seeing more and more cases of Ethernet connected PCs that can't get SharePort working correctly where wireless PCs work fine, I would have expected the opposite to happen.
If there is no software on the Vista PC that could block it intermittently, such as a VPN or an active firewall then it may just be one of those times where it just doesn't want to work, as an outside the box idea try updating the network card's drivers on that PC, occasionally I have seen that fix all sorts of strange network application issues.
If you have time to spare it doesn't hurt to send an e-mail to D-Link explaining the symptoms, if we get enough in they may be able to stabilise the program more.
PS Try the new 1.10 version if you haven't already: ftp://ftp.d-link.com/Gateway/dir655/Apps/dir655_pc_shareport_utility_110.zip
Date: April 19, 2009
Time: 3:42 am
Take a look at the d-link forums before upgrading to shareport 110. People are having some issues with it.
http://forums.dlink.com/index.php?topic=5098.0
Date: April 19, 2009
Time: 3:50 am
Looks like Ben has already addressed this on the main site. BTW, thanks to Ben I have my Canon MP610 working wireless using shareport 114 and FW121. Thanks Ben!
Date: April 19, 2009
Time: 9:25 pm
Thank you for your information Lex. I wasn't aware that they had to be used with the 1.30 firmware but it makes a bit more sense now, I'll update the main post to reflect that.
Date: April 22, 2009
Time: 5:12 am
Hi Ben and all,
thanks for all the tips and hints, i've read everything.
I bought a 655 a few days ago and tried to get the shareport working since (tried really hard).
I just wanted to view some movies on my laptop without having to turn on the PC and make backups to the USB-HDD. Shareport seemed great and made me pay 179 EUR.
Tomorrow it's going back to the shelf. I want my money back.
I hope the people at D-Link think twice next time before launching something so crappy!
Date: April 22, 2009
Time: 12:00 pm
They are having alot of trouble keeping customers at this stage, It would have helped them alot if they had not advertised shareport as a feature.
Date: May 19, 2009
Time: 12:10 pm
I tried getting Shareport to work for a while and finally gave up and uninstalled it. Now I am trying to print the old fashioned way (over the network and not using the d link's USB hub) and I am having huge problems. Printing over the network was fine before shareport, now after intsalling and uninstalling it I have serious issues. Printing takes FOREVER. I mean it is VERY slow. Could the shareport software have left something on my machine that is causing this? 谢谢。
Date: May 19, 2009
Time: 4:41 pm
It could have done something, SharePort connects you straight to the printer, so you install drivers for the printer that are configured to connect via usb, if they weren't uninstalled properly then there may be some redundancy that is causing the slowness, try removing all of the printers listed in “Printers & Faxes” and reinstall the network printer driver, unfortunately printer drivers are tricky to remove completely but that should at least remove some connection to the old (USB SharePort) drivers.
Date: May 20, 2009
Time: 1:03 am
谢谢。 Where exactly would I find the “network printer driver?”
Date: May 20, 2009
Time: 3:51 pm
Well when you have all your printers uninstalled and you find the printer over the network windows should prompt to install the printer, you may have to right click it and click connect if double clicking doesn't work, here's an example:
Often it will get the driver for the printer from the other computer or windows update so you don't have to find it, however if it asks for a driver simply use the printer's driver cd and it will install those instead.
Date: May 21, 2009
Time: 2:05 am
Hello all, I noticed you guys are posting on the shareport Utility.
I just wanted to give you guys out there a heads up on the New firmware for DIR655 (ver 1.31) that requires you to upgrade the shareport utility to ver 1.10
It seems there is a bug in the utility or the firmware. Once installed the utility is able to “see” the printer and connect to it with the connect button, however, if you want to be able to connect to the printer automatically (like with ver 1.14)your not going to be able too.
After spending a couple of hours on the phone with Dlink and various support personnel, I was finally told by a “software specialist” that it will not work and I will have to manually connect every time I want to print.
Some may thinks, that's no big deal just hit the connect button, but when you have several computers and they all want to print from that particular printer it can be a hassle to go to every machine and connect then disconnect.
So if you decide you want to upgrade your firmware, keep this bit of info in mind.
Until then I have to wait till another software upgrade to become available and hope that it resolves the problem.
噢！ and by the way once you upgrade the routers' firmware to ver 1.31 you CAN NOT revert back to the previous one.
Date: May 21, 2009
Time: 4:41 pm
Thanks for the information, I wasn't aware of the bug in the newer version, hopefully they fix them all later on, but I wouldn't bet on it.
Date: May 28, 2009
Time: 8:27 am
Hey Ben,
Thanks for the tutorial and screenshots. I have tried your method to set up the SharePort 1.14 with my DIR-655 Firmware V. 1.21. It is working well. Thanks!
Initially, the print job encountered a problem. I just restart the print job and use SharePort to disconnect with the printer then reconnect again, then it starts printing as normal.
Thanks!
丹尼斯
Date: June 3, 2009
Time: 4:01 pm
嘿家伙！
I am also interested in the D-Link DIR-655 and I want to connect my USB hard disk to it as some kind of mini-NAS. Has anyone here successfully connected a USB hard disk yet and (more importantly) tested the speed you can achive through this connection? Thanks a lot in advance,
大卫
Date: June 3, 2009
时间：下午9时38分
Connecting a hard disk works however the connection is limited to USB 1.1 speeds (12 Megabits/Second or 1.5 Megabytes/Second), so it's quite slow, generally not recommended if you're going to be transferring large files.
Date: June 5, 2009
Time: 10:41 am
Hi guys, just letting you know there is a new version of the DIR-655 firmware that you can read about here that fixes a few SharePort issues.
Date: June 8, 2009
Time: 9:15 pm
Hey…
Anyone know if the usb utility can be used when the router is configured static as an access point? I ask because I have had no luck in doing so. '-'
Thanks in advance for any help.
Date: June 16, 2009
Time: 10:20 am
I just upgraded to the latest firmware…
Firmware Version : 1.31NA, 2009/04/24
Besides the Web Environment not working in Opera, the speeds for the SharePort with a USB2.0 HDD are really slow… I get from 800KB/s to 2MB/s… while I think USB2.0 directly connected should be around 30MB/s.
Date: June 16, 2009
Time: 12:42 pm
Hi Julio,
SharePort only works at USB 1.1 speeds and you're getting the correct speeds for that. I wouldn't recommend hard drive usage with it as there have been a few people talk about losing data when the software/connection decides to act up.
Date: July 9, 2009
Time: 10:55 am
喜本，
I am from India.
Recently bought the DIR 655. (H/w Ver: A3 & F/w Ver: 1.11WW)
and couldn't use the usb port for accessing the external hard disc or a printer. on calling the tech support, they said the hardware version you are using doesn't support this feature, it should be A4.
Is this the problem of h/w ver. or F/w version.
Date: July 9, 2009
Time: 12:53 pm
I don't think they have been telling the truth there, the A3 can use SharePort, however you will need to upgrade to a newer firmware version to be able to use this, either a 1.2x version or a 1.3x version, keep in mind if you upgrade to the 1.3x series of firmware you will not be able to downgrade again.
Date: July 11, 2009
Time: 2:18 am
thanks a lot Ben for clearing this confusion. I have another query. After speaking to the D Link tech support, they say if i upgrade the firmware version, then the warranty on the product won't be valid. so should i just go ahead with the upgrade.
and why do you think after upgrading the firmware, i may need to downgrade it again.
Date: July 11, 2009
Time: 1:09 pm
When it comes to the 1.3x firmwares they do have problems that the 1.2x series don't have, but they do fix a few problems with SharePort that were causing a few users to not be able to use it, all DIR-655 routers respond differently to different firmwares so what works for one may not work properly for another.
To be safe I would recommend using a 1.2x version firmware to use at first, if it doesn't work properly for whatever reason you can downgrade the firmware back to the version you currently have.
Most people have only a few problems with 1.31 but if you want to readup on these check out the D-Link Forums here
Date: July 24, 2009
Time: 12:25 am
Had the same problem with SharePort not finding the USB-printer (connected to a DIR-825 router) on one my computers. Tried updating firmeware, s/w, just about everything, but no. At one time though, it did find the device, which set me off thinking. This might just sound stupid: but don't touch the mouse (USB-connecdted) while rebooting”. Works for me every time!!! Anybody that could understand why?
Date: July 24, 2009
Time: 6:09 pm
That is a very odd solution for it, but if it works then I would encourage people to test it out if they have that issue, doesn't hurt to try. Perhaps disconnecting such usb devices while rebooting would also work?
Date: July 25, 2009
Time: 10:23 pm
I connect Buffalo Drive Station external usb harddisk to my DIR-655. Before I use Network USB Utility to access the harddisk, the router is working fine (no disconnection when surfing internet). However, after I connect to my external harddisk via Network USB Utility and then try to copy files to the harddisk, every time after a few seconds, the connection to the router is broken. I have to reboot my computer.
Does anyone encounter this problem? How can I solve this? 谢谢您。
Date: July 26, 2009
时间：上午03点45分
I had a problem with Shareport (1.14) not detecting my Seagate 1 TB USB HDD connected to my DIR-855 (1.12EU)
It would only detect if i connected my laptop (Vista) to the DIR-855 through cable, not wireless.
Problem was resolved after disabling my ethernet adapter, keeping only the wifi adapter enabled, then rebooting.
So it seems like Shareport “locks” onto the initial adapter used for connecting.
Now it works like a charm, with no noticeable delay r/w on the HDD vs connecting directly to the laptops usb-port.
Date: August 8, 2009
Time: 9:24 pm
喂
I have read the dfferent posts but not seem people having a similar problem…
FW : 1.32NA
1 computer with Vista, 1 with XP
Bought the router last week.
Globally it works fine but I have problems using the shareport utility frequently.
If I want to print :
When I switch the router on, it connects to the printer (Samsung ML2510) and everything works fine. The page prints.
If the router is up for a few hours and I want to print, the router sees the printer, shows it as “available” but is not able to connect to the printer. It always tries (can see the trying to connect to samsung ML2510, please wait). The message stops and comes back 2 seconds after and even after 10 minutes it is still not able to connect to the printer.
If I reboot the router, everything works fine.
If I wait a few more hours, same pattern, not able to connect to the printer except if I reboot the router.
Do you have any ideas ?
Thank you !
千兆
Date: August 14, 2009
Time: 12:22 am
Same problem here, works fine and dandy after install but a day or two later you try to connect, it says connecting, times out in a refresh to available status, and nothing. I'm so frustrated with this shareport utility and every time I call customer svc some Indian person with the thickest accent I've heard answers the phone. I bought this router specifically for this feature and it's very broken. It's a huge oversight on an otherwise excellent router. Anyone have any ideas?
Date: August 18, 2009
Time: 10:48 am
Same problem here on a dgl-4500, not very happy worked well for the first 2 days then nothing. All PC's are XP.
Date: August 20, 2009
Time: 9:44 pm
All users having issues with SharePort, check out this post I have made about a possible newer version of the software.
日期：2009年9月11日
Time: 5:51 am
Hi, I have a DLink DIR-628 router and I acctually buy it for the shareport application… Like some of the people here it worked fine for maybe two days, the its doesnt find anything that I connect to the port. Recently I download a shareport update to see if that would fix the problem but it didn't. I hope someone can help me
日期：2009年9月14日
Time: 7:48 am
Did you try rebooting the router? Just disconnect the power, wait a minute and reconnect. See if that helps.
Date: September 15, 2009
Time: 5:47 am
I have done that, but again you will have to do it every 2 days. If I reboot the computer it sometimes shows 2 of the same usb device. I will have to scrap the whole idea and share the damn thing through a networked PC. What a joke, get it right the first time…Is it that hard to fix it? While I am on this topic ever scince I have updated the frimware the router just periodically shuts down? It was a great router before not sure what is happening now?
Date: September 15, 2009
Time: 3:50 pm
The router is shutting down?
As in off completely or a reboot?
If it's turning off then you may have a much bigger but slightly less common problem with it, if it's rebooting then I'd still suggest to give D-Link a call/email and see if you can get it replaced with a new one.
Date: September 16, 2009
Time: 11:41 am
It just reboots periodicaly, I will call but I don't think it is under waranty
Date: September 16, 2009
Time: 1:36 pm
Some people have luck when calling the manufacturer (in this case D-Link) directly when out of warranty but I wouldn't hold my breath.
Date: September 20, 2009
Time: 1:59 am
Spoke with DLink tech support yesterday, and after an HOUR of trying to get the SharePort to work, I was transferred to a 4th support agent who actually knew what he was talking about. Within seconds, he informed me that not all devices are supported, and that DLINK will not publish a list of devices that are. My 250GB Western Digital USB drive will not work, which defeats the purpose of paying extra for the SharePort feature.
日期：2009年9月24日
Time: 10:52 am
i bought this router for the shareport feature and after readings hours of the above and trying numerous tweaks i still cannot get my external drive connected. i love the performace of the 655 but feel a little ripped off by our D-link bros – as it just isn't worth anymore effort to try to get this puppy to work 'as advertised'.
Dear D-LINK – please get your sh$t together. xoxox
Date: September 26, 2009
Time: 8:51 pm
Currently have two laptops connected to my DIR-655. However, only one can detect the printer though the router's USB port. The other one has “No USB device is detected” message. Would appreciate assitance from anyone. Thanks!
Date: October 1, 2009
Time: 7:55 am
Bonjour,
I had similar Shareport issues two weeks ago. I wrote to DLink and their answer solved my problem. I take the liberty to show it below in the hope it will help somebody. IN my case I was not using the proper version of the Shareport utility.
With the firmware 1.32NA make sure that the shareport utility that you using is version 1.10. This can be downloaded from the following link http://www.dlink.ca/products/?pid=530
Date: October 2, 2009
Time: 9:04 am
Having the same problem as jimmey above.
Got a DIR-655 V1.21 and shareport V1.15, running on a vista laptop. I use a Dynex 7port USB hub on the router.
Seems like I can use 2 Lexar thumb drives fine and can use my IPOD hook up fine as well as my HP printer, all @ once if i wanted but if i hooked up my 500GB lacie external HD it sends windows explorer into (not responding) after i try to connect. tried the same HD just into slots on laptop and no problems.
跆拳道！
Thinking maybe this HD is incompatible as well.
Any idea's of which HD's will work?
Date: October 2, 2009
Time: 5:31 pm
There are many usb storage devices that don't work at all and more that don't work properly, I haven't heard anything from D-Link about any reasons why.
Is the hub self powered? The hard drive may be after more power than the router can supply to it, a hub with it's own power source may be able to provide enough power instead.
Date: October 5, 2009
Time: 3:53 pm
QUOTE from Author: Denis Galipeau Date: October 1, 2009 Time: 7:55 am, you wrote : “With the firmware 1.32NA make sure that the shareport utility that you using is version 1.10. This can be downloaded from the following link http://www.dlink.ca/products/?pid=530 ”
------------
Dear Sir/Madame
It took me two days to search, read, install, reboot… and messed up with DIR-655, finally I got the FW upgrade to 1.32NA + SharePort 1.15 just after I bought the 655 3 days ago (I returned the 825 Dual Bands to exchange for this 655) and your post makes my day. I uninstall the 1.15 Share Port and install V1.10 as you said http://farm3.static.flickr.com/2541/3983347534_0b8a0cc795_o.jpg
Thank you, et al.
Date: October 14, 2009
Time: 4:10 am
hi here is jean from germany…
i have trouble setting up my printer to the router above and i really need some help on it.
first at all im using the dlink dir-655 router (Version A2). the first thing i did was updating the firmware up to the latest 1.32NA. after that i configured my internet and all the network settings. it works just fine but here is my problem: i cant setting up my printer (a canon pixma ip4500). under the setting usb-settings i just dont have the possibility to choose usb, only shareport or wcn configuration. i already installed the sharport utility (version 1.15) on my computer. the printer drivers are installed too.
before i used a separate printserver. but i cant use it anymore because i switched to wpa2 and draft-n in my whole network. the printserver doesnt work with it so i need the usb port on the router.
i also tried to change the connection type to an ip-port on my computer. i did all the settings (ip-adress of the router, lpr with byte counting and stuff) but it doesnt work. my printer doesnt get shown online on the shareport utility. how can i make my printer work???
very thanx for your help.
Date: October 14, 2009
Time: 5:01 am
its jean again…
my problem changed a little. i kicked off the shareport utility v1.15 from my computer and i reinstalled v1.10. now the utility shows my printer online. the drivers are still installed of my printer.
but i still dont get my printer work. even its connected. i guess i need to configure the connection settings on the port settings of the printer local on my computer, because its not working about the settings in the shareport utility.
how do i get my printer work??? thanx很多。
Date: October 14, 2009
Time: 10:24 am
Try to reinstall that printer driver to your computer and test print to make sure it works then from there connect that printer USB cable to the router. Now it must works.
Date: October 14, 2009
Time: 2:52 pm
I agree, it seems the printer is being correctly connected to, remove any cases of that printer that you already have installed as they would be pointing to the wrong device location and then reinstall the printer to change the location from a network device (before) to a virtual usb port (now on shareport).
Date: October 25, 2009
Time: 4:28 am
I have firmware 1.32NA with Shareport 1.2.0 B3. Didn't work until I opened port TCP/UDP 19540 in my router (DIR-655). Works perfectly now with all my wireless laptops. KK
Date: October 26, 2009
Time: 8:29 am
“I have firmware 1.32NA with Shareport 1.2.0 B3. Didn't work until I opened port TCP/UDP 19540 in my router (DIR-655). Works perfectly now with all my wireless laptops. KK”
Please let us know how to do that. 谢谢。
Date: October 26, 2009
Time: 8:58 am
Do you have any more specific information on where you opened the port kk? There are many ways of opening a port on the router.
Date: October 26, 2009
Time: 9:35 am
I guess that can be in the http://192.168.0.1/Advanced/Gaming.shtml at ADVANCED/PORT FORWARDING and check your Computer name/select + IP/add, to allow it can see TCP/UDP in range of 19540 ? Since mine is working with 1.32NA vs 1.10 Shareport and I did not know much so I try not to touch anything and if kk can give us the correct answer what had been done, that would be fantastic.
Date: October 26, 2009
Time: 10:35 am
The only problem I have with it is that you can't forward that port to more than one computer and if it does work by forwarding to only one of the computers then I'm not sure how it would change anything, unless it's some sort of bug in the router.
Date: October 26, 2009
Time: 11:10 am
I assume as Dlink or someone stated that the shareport can only be used for users one at a time, so I also assume the Router Admin can go ahead input all computer name + its IP into the port forwarding list, be readied for users to use as one person at a time. Well if FW 1.32NA + SP 1.10 work as it is, why not just use this configuration, make it simple. My thought.
Date: October 28, 2009
Time: 5:22 am
hello people, its jean again.
i still have this problem to connect my printer but now i can be more specific. i tested it on different computers in my network and it only works on my netbook… so here is what i did:
i connected the printer to the router via usb. the shareport utility shows my printer as available. if i want to connect it, it works just fine (on my netbookk). now i plugged off the printer and i plugged on an usb-hub on my router. now i plugged in a second device, my printer again and an optical disk drive. the utility shows both as available and the connection works fine too on my netbook, even with both devices at the same time.
but this only works on my netbook. maybe (i think) it really must have to do anything with a port opening on my other computers. on my netbook it works. i have win home on it. unfortunately it doesnt work on my other computers in my network (i have win pro on each one on it).
i already know that i only can connect one computer to those devices. even when i disconnect the devices from my netbook, i cant get them run on an other machine. the utility shows those devices on my other computers as available but i damn cant get it connected there.
now im really out of advice here and i need some help. someone please need to tell me how it works with the port opening or some other reason.
请帮助。 thanx alot.
Date: October 28, 2009
Time: 10:28 am
Many people have insisted that re-flashing the firmware on the router does wonders for it's reliability but I'm not such a fan, but it's always worth a try.
It's a good sign that the devices can be seen at least on the other PCs, is there any form of firewall or antivirus software that the other PCs have that isn't installed on the netbook?
I notice from your previous comments that you are already on 1.32, so flashing the firmware shouldn't cause any harm, I would recommend trying the firmware here , it fixes a SharePort bug of some kind, it may be the bug that you are experiencing. At the very least some users that have had trouble with 1.32NA have reported that the firmware just works better anyway, which could be caused any number of things from a better flash to it's ability to wipe the settings. I'm *still* yet to test how SharePort works with it, but I may do so shortly.
The port forwarding idea above is interesting, but doesn't sound practical as SharePort is automatic and port forwarding is not, so you would be forever going in and changing the port forwarding options to each PC.
Date: October 28, 2009
Time: 7:37 pm
last night i tried that thing about opening a port on the router and -how surprising- it doesnt work either.
i need to know how to open this port on the other computers, i dont know. maybe this works.
i have already thought about switching back to an older version of the firmware on the router. but i think that would not change anything. its how you said before, its a good sign, that the devices are shown as available on the other computers.
by the way i have installed on each machine the same antivir software, service pack 3 and included the windows firewall. the only thing different on my netbook is, i have xp home on it and xp pro on the others. oh yes on each machine i also have peer guardian installed.
i doesnt work even if i terminate the task of peer gaurdian or the other firewall software. there is also no way to change something in the win registry about the shareport utility.
so how does this work with the port opening or do you have some other advice maybe i should try to get back to an older version of the firmware.
thanx alot.
Date: October 28, 2009
Time: 7:53 pm
For starters I would recommend the fixed firmware here as it really has helped with SharePort's connectivity and stability for me, you can also try going to the earlier firmware as well, I think 1.30 or 1.31 supports the older version that seemed to work well for people.
I don't know how the whole port forwarding thing is supposed to work and it just seems really strange to me.
I don't think the software you are running would cause any problems as I also run them on the computers that don't have SharePort issues.
This is a little off-topic but I started using PeerBlock a few months ago, it's a recent fork of PeerGuardian where they have performed many fixes and even have a signed driver, I highly recommend it if you find PeerGuardian to be a little unstable/slow like I did.
Date: October 28, 2009
Time: 8:05 pm
im back and i solved this problem. the solution is so damn easy *self-banging-head-against-a-wall*
in the network options i just needed to unmark the utility in the firewall options. now it works fine.
Date: October 28, 2009
Time: 8:14 pm
Great news Jean, glad you were able to get it all worked out properly.
Date: October 29, 2009
Time: 2:37 am
Good info. Hah haha
)) that can make an early TGIF for this week
Date: October 29, 2009
Time: 9:10 am
I have a 1.5TB WD USB hard drive. I have the 655 with 1.32NA A2 firmware. I can connect to the drive but nothing happens I do not get explorer opening up to auto play or anything. Happening with WinXp home and WinXP pro…
I don't see the drive show up in my computer but if I connect the usb 1.5TB drive to my pc or laptop I can see it and read/write to it.
Date: October 29, 2009
Time: 9:11 am
I also am using shareport 1.10 newest one for this firmware
Date: October 29, 2009
Time: 9:19 am
I used a corsair usb stick and it open and works perfectly!
Date: October 29, 2009
Time: 10:21 am
Some of these drives, especially the newer ones need extra USB power to turn on fully and I don't believe the router has the power capability in the USB port to do so, if you have a self-powered 4 port usb hub or anything like that you can try connecting through it as it should have the necessary power.
If you a clicking sound that happens every 1-2 seconds at a regular interval from the drive when it's plugged into that port it's a sign that it's not getting the power that it needs as it is stuck in the power up cycle, my external USB drive does the same thing if it connects to a port that doesn't have enough power for it.
Officially D-Link insist that large drives do actually work, just in reality people are finding that it's hit and miss.
Date: November 13, 2009
Time: 5:48 am
嗨
I have tried do download shareport to my computers, all of them running win xp.
Every time the installation is almost completed, the computer goes into “bluescreen”, and I have to restart it. The same happens again if I try to run the program.
The only time I manage to run the program is when I disconnect any network connection…but then I don't have much use for the software…
Do any of you have any ideas why my computer crashes??
please reply!
日Thnx
Date: November 13, 2009
Time: 8:10 pm
Find any software that the computers share in common, for example security or Anti-virus software and try disabling them while you do the install and see if it occurs during, some software needs to be uninstalled before it will let it work properly though.
It seems that it may be caused by the network card's driver or some service running on it like the security software from above.
The easiest way to know for certain what specifically is causing it is to Google search the message that appears in your blue screen, usually just the error code(s) are needed, if it states a .sys file then you can search and find what it's for.
Usually a driver update can help but if it's occurring on multiple PCs with different hardware then it's probably some software conflicting with SharePort, it is very picky and in many cases will not install with certain software installed.
Date: November 25, 2009
Time: 7:02 am
I have DIR-655 firmware 1.21
Network USB Utility 0.93
3 computers on network
2 computers recognize and can connect to the usb printer (an HP Laserjet 1200) through Network USB Utility with no problems.
3rd computer has been able to connect with no problems for months until upgrade to version 1.15 from the program. After install both version 0.93 and 1.15 were present but neither saw the router. Uninstalled 0.93 and 1.15 still did not see router. Uninstalled 1.15 and reinstalled 0.93 and 0.93 still did not see router. Uninstalled 0.93. Removed referrences in HKEY_CURRENT_USER / SOFTWARE / D-Link and HKEY_LOCAL_MACHINE / SOFTWARE / D-Link to both 0.93 and 1.15. Restored factory default on DIR-655. Reset all settings. Reinstalled 0.93 but still no connection to router.
When right clicking on the red icon in the taskbar on the 3rd computer, the menu does not include the top portion that lists the router name and ip. The top of the box is right above Advanced Options. The router name and ip are present on the 1st and 2nd computers.
I have hit a frustrating dead end. I do not understand why this no longer works on this computer. Other than my previous attempt to upgrade to 1.15 through the network usb utility program itself there are no other software changes on the 3rd computer. I'd be grateful for any ideas on how to fix…
Date: November 25, 2009
Time: 7:41 am
To remove HKEY completely, you may need the Registry cleaner such as http://www.yamicsoft.com/ or I guess you can Restore your system to the old Point before the date you installed 1.15 if that Point is still available in your System Tool / System Restore.
I suspect your 3rd computer must has something not compatible in the Window itself or so ?
Date: November 26, 2009
Time: 2:42 am
I do have restore points prior to the installation of 1.15 but all attempts to restore to these points fail. I will look at the registry cleaner next.
Date: November 26, 2009
Time: 10:45 am
Registry cleaned and defrag'd. Smart uninstaller utilized to ensure Network USB Utility and Shareport completely uninstalled (it did find a registry key I did not previously locate). Unfortunately, after doing a fresh install of the Network USB Utility ver. 0.93 from the disk that came with the router, it still doesn't display the D-Link Router at the top of the menu displayed when right-clicking on the icon. The utility is still red – not recognizing the network and the utility states no usb devices are connected to the network. I am connected to the network and have internet access. The other computers on the network are recognizing the device and network through the USB Utility. Some fragment of the previous 1.15 install must still be screwing this up…
Date: November 26, 2009
Time: 3:31 pm
Even with registry cleaner, sometimes user has to reboot and reclean by two or more passes as my experienced and surprised some still shows up.
Date: November 28, 2009
Time: 1:25 pm
Hello – glad I found this thread/forum.
I purchased ( just 2 weeks ago ) a D-Link ( my first ) DIR-628 SPECIFICALLY for the Shareport feature.
I'm running Windows 7 64bit on my main system… and I've flashed the router firmware to the latest rev. and have downloaded the latest Shareport util. I've been on the phone several times with D-Link ( support ) and they pretty much have given up… with the last word being “Sorry, doesn't work with Windows 7″… watch for an update to this utility.
I figured I could make this work in a Virtual Machine running WinXP Pro~32bit as the guest OS… still nothing. Is this just a waste of my time and money ? Should I return the router and get a NetGear ?
I've never owned a D-Link before… are they a reputable company with good intentions to make their products work ( even if I have to wait for some update ? ) ?
提前感谢！
Cheers, Sean
Date: November 28, 2009
Time: 3:19 pm
The SharePort Utility works with Windows 7 (x86/x64) just fine, in theory it should always work, it's just that it is easier for them to say it doesn't as I don't think they support Windows 7 officially with their current range of routers yet.
D-Link have made progress with their SharePort software but it takes them a lot of time to fix things and they don't seem too enthusiastic about it anymore.
D-Link used to be a reputable company with good intentions…
Netgear routers are pretty good, their latest range beat D-Link's hands down IMO
Date: December 2, 2009
Time: 2:01 am
I have not been able to fix this problem. I have uninstalled the program using the software at http://www.yamicsoft.com/ and cleaned the registry many, many times. Whatever happened when I chose to upgrade to the SharePort Utility 1.15 from within the Network USB Utility program has modified some file on my computer that is not getting fixed when the program is uninstalled…even when it is all completely uninstalled and the registry cleaned. I know that the failed, attempted upgrade did not modify the router because the other computers in my residence that are using version 0.93 of the Network USB Utility (and which never underwent the attempted upgrade to 1.15) continue to be able to print to the printer connected to the usb port on the router. Its just this, my computer, on which I had attempted the upgrade. I have even installed the software on a laptop and had it wirelessly connected to the router and it could print from the printer. So something has been changed on the computer as a result of the installation of 1.15 that doesnt show up when uninstalling the program. The change has to do with this computer's recognition of the server ip address because when Network USB Utility 0.93 is reinstalled it fails to recognize the network or list it in the box you get from right clicking the utility icon on the task bar. This computer is connected to the router and does have internet access as this is the computer i am posting this message with. Any ideas on what file may have been modified by 1.15 so I can attempted to fix it. My only other option is a complete reinstall of all my programs on a new hard drive…I would like to avoid that.
Date: December 3, 2009
Time: 6:38 pm
i have a dir 655 router firmware 1.30v
shareport v1.15.9 installed on the systems on the network.
am using an hp laserjet 1320 printer
the problem i have is once the shareport is launched i keep getting the pop up message that reads: connection failed! the server is not responding/your internet connection is down.please check and try again later on and on.and i cant seem to print.this message was not coming on before just started i reset the router when i had issues to it.i have uninstalled and reinstalled the shareport on my system but i still get this message.what could be wrong?
also what should be the normal setup,after installing the shareport on your system dou installed the driver for the printer
Date: December 14, 2009
Time: 8:47 pm
Jeff, I had the same problem after doing a firmware upgrade on my 635. I had to disable the “auto channel scan” (located in wireless settings) which allowed me to fix the routers channel to channel [x]. I also checked that my “transmission rate” was set to “auto”. HTH
Secondly, with the shareport I can get my 1TB hard drive to work but not my 3 Mobile 3G modem. I believe I have set it up correctly and my ISP is listed in the WWAN ISP dialogue box. Any further tips???
Date: December 21, 2009
Time: 10:22 pm
Hi Jeff
I have exactly the same problem. 3 notebooks, 2 work fine with SharePort, one simply refuses to see the router / usb devices. All computers have the same setup, OS, security, but something obviously must be different and I just can't figure out what it is. I tried everything and I consider myself quite computer savvy. Any success stories from your side in the meantime?
Date: January 16, 2010
Time: 8:01 pm
Hi guys, Firmware 1.33b01NA has been released .
Date: January 17, 2010
Time: 6:35 am
I see some of you have got sharepoint to work, good for you. 余cannot似乎得到它的所有工作。 什么是负载bxllxcks！ 我在英国，并1.21EU固件，并试图利用共享点1.15软件，路由器版本第5条。 我只是得到了什么声音正在然后进行插入（如USB设备系列）。 作为一个无线路由器是好的，但我必须说，我didn't做足够的研究和期待的USB端口工作。 不要购买这件事如果你需要一个NAS风格分享的事情。 我并没有我的打印机，可能不会浪费我的时间这样做。