Dicing with death (of a Laptop Hard Drive)

We all make stupid mistakes once in a while

Late last month I backed up all my important data to a laptop hard drive that I had put in my external usb case so that I could format and install Windows again, this was to do with upgrading to a new core i7 based system, replacing the Motherboard/CPU/RAM, unfortunately I was running a RAID 0 array with my 2 new hard drives and the i7 motherboard’s raid chips were both different from the one I was using before, this requires a recreating the RAID and destroying the data.

Everything went smoothly and I was up and running quite quickly, however I noticed a symptom that I had experienced with my previous system, a pausing when browsing the hard drives and sometimes windows not booting (not passing past the BIOS screens), I noticed it was getting stuck on the external hard drive I was using so I removed it and all was well, I realised straight away however that there was something wrong with the hard drive.

I was able to copy over some of my files when I realised it was simply getting stuck on some, causing explorer to lock up etc and making the task very tedious, I was worried about taking the data off as if the drive has suffered a head crash I may be in trouble as hard drives can destroy what’s left of the data in the area when you attempt to read it, however that was not the case this time luckily.

I was able to run chkdsk once, it took forever but it was able to recover some files which made things better for me until I had the most important stuff such as precious photos etc off the hard drive and safe. I was skeptical that my problem was the hard drive, after all it didn’t make any odd noises or anything that would normally indicate a drive failure, so I took it out of the enclosure and put it in my laptop, immediately I got my answer, the BIOS POST halted on first boot up explaining that S.M.A.R.T is reporting a generic error (the most generic error possible I might add) that basically means the drive is failing and I should get the data off it.

It has taken me a few weeks and through using programs such as TeraCopy and an OSX program that I can’t quite remember now (it was no help anyway) I was able to get most off, about 20 files of no importance were corrupted beyond repair.

I now have all my backups on my main drive and also on another external drive that has proven itself to be quite reliable, if one goes I still have the other, lesson learned.

PS. Another lesson learned is that through much searching that hardly anybody experiences the issue that I did and most software is tailored to people making mistakes and formatting a perfectly good hard drive.

D-Link SkinIt

I’m not sure if this is new or old news but D-Link are advertising that SkinIt skins are now available that can be used to customise D-Link products such as their newer routers.

I had a fun playing around with the skin making software, it’s easy to use and I got the hang of it straight away, I haven’t purchased a skin yet, however I might in a few weeks time.

The skins are $19.95 USD however currently the coupon ‘dlinkskins’ will get you 10% off.

You can get started here.