D-Link has released the 1.34b03 Beta firmware for the DIR-655 router.
Disabling the SecureSpot feature, the router will not query Bsecure when the feature is disabled
Statistics will not clear under “Status>Statistics”
The first fix was available in the previous firmware 1.34b02, I have found it stops connections that people have noticed the router give to the Bsecure servers when SecureSpot is not running. The second fix addresses a bug that appeared in that firmware causing the statistics page to report ridiculously high stats.
Using this firmware is at your own risk and will most likely void your warranty if something goes wrong.
I have been debating whether or not I should put this up, however after much testing I have concluded that it is safe, it works and many other people have used this method, it goes without saying that this is still quite dangerous to do as nobody knows why D-Link doesn’t allow the downgrade to take place and they may believe it can cause bricked routers.
There is firmware floating around that allows a D-Link DIR-655 to downgrade to pre-1.3x firmware (and also to other countries’ firmware), here are the results of my testing:
First I factory reset my router, it was running the 1.33NA b01 firmware, then I firmware upgraded it to the DIR655A4_FW131RUB10 firmware file that I will make available at the end, this is a modified version of an official Russian firmware, (apparently 2 bytes is all that has been changed).
Once this was complete I was running the modified firmware, as you can see it is still in English.
Then I was free to upgrade/downgrade to any firmware I wished, so I decided to try the official Australian Firmware 1.21 and this worked perfectly.
Here is the chklst.txt info on the firmware to prove it downgraded successfully.
Remember that this is the North American firmware so while it is compatible with other countries’ hardware it cannot be downgraded to pre 1.3x NA firmware OR to any other country’s firmware, so once you go NA, you can’t go back.
Please visit the D-Link forums post about it here before you install the firmware as this doesn’t have support from the usual places. Feedback can be left in this forum post.
Also let us know how it goes in the comments below.
D-link have released an unsupported beta version of the DIR-655’s firmware, this supposedly fixes only the DNS Relay bug.
You can get it here, they seem to be pretty insistent that the firmware shouldn’t be used if you’re worried about your warranty etc so I will just leave it at that link, I’ll be testing this seeing as my router is stuck as a glorified Wireless AP and Gigabit switch due to it’s bad behaviour so it can’t really get much worse.
D-link have released a new beta firmware for the DIR-655 in the hopes that it will fix an undisclosed SharePort issue.
This code can be used with all hardware revisions of the DIR-655
This code only addresses the shareport issue
The attached Shareport utility will only work with this version firmware
I don’t know what SharePort issue they are referring to and I have not tested this myself.
Once again this firmware WILL NOT DOWNGRADE to pre 1.3x firmwares so if you are on a pre 1.3x firmware then it is suggested that you stay put because chances are you will only have more issues and you can’t go back.
This firmware is beta, it is a test release, it may break/brick your router for no reason.
As the changelog suggests there is a new SharePort utility included that will supposedly only work with this version, I don’t know if SX Virtual Link works with this firmware, but for the record it has a version number of 5.6.2 making it newer than SX Virtual Link.
Update 27th of October 2009: I have decided to test this firmware out as some users have reported that there are some small wireless improvements, I will leave any findings in the comments below. I will also try a SharePort stability test as the longest I have been able to keep a single SharePort connection alive has been about half an hour.
Update: D-Link has released a new beta firmware for the DIR-655 here, it ONLY fixes *a* SharePort issue.
This is old news but I thought it would be best to point out that the final firmware version of 1.32 is out, here is the change log:
1. Fix when disable DHCP server and enable DHCP server, LAN PC cannot get IP.
2. Fix using wireless client to configure Access Control rules, cause DUT reboot.
3. Fix UPnP bug.
4. Disable CAPTCHA by default
5. Fixed QRS issue, can’t set up wireless setting.
6. Fixed Router DHCP IP range issue.
7. Fixed WPS UI Show Error warning message.
8. Fix potential security leak with CAPTCHA.
9. Fix USB LED issue about Shareport.
10.Fix Shareport HP932C with Wins 7 issue
11. Fix if set more than 8 Trigger or Firewall port in Application Rules. It will show Warning message.
12. Fix bug: When QRS set wan type of rt to DHCP, the rt will not set Primary and second DNS.
Note: This firmware does not allow downgrading to pre-1.3x.
So far it appears that the DNS Relay lockup bug has not been fixed, SharePort is still acting up for users and in some cases even worse, some people report smoother file transfers however.
Update 1: A new build has been released of this beta, this one has been listed with the only change being CAPTCHA is set to disabled by default, however it is 2KB larger so perhaps they have changed something else. I have updated download links below.
Update 2: The final release of this firmware has been posted, check below for the download link, click here to read about it.
Update 3: D-Link has released a new beta firmware for the DIR-655 here, it ONLY fixes *a* SharePort issue.
D-Link have just uploaded a new beta firmware release for the DIR-655, this fixes issues with SharePort and fixes that CAPTCHA security leak that could cause the router to give out the admin password. I have not tested it personally so I am unaware of any issues however others at the D-Link forums have experienced no problems so far. There are also no reports of this fixing the lockup issues users of the 1.31 firmware were experiencing but it isn’t mentioned in the release notes, we will know for sure though in a few days.
Update: Some users are reporting great success with the new firmware and SharePort, lets hope that continues, also there has been a report from a Mac user stating that after upgrading the firmware the admin page was unable to be used in Firefox or Safari on OSX so keep that in mind those that don’t have a Windows PC just in case.
Firmware: 1.32 (Beta 01)
1. Fix potential security leak with CAPTCHA.
2. Fix USB LED issue aboutShareport.
3. Update chklst.txt
4. Fix SharePort issue
Again this is beta firmware so it comes with the added disclaimer of possibly damaging your router, you can download the firmware below, I have made a mirror hosted here so if they take it down it will still be available here.
A few people have been experiencing trouble with their DIR-655 routers locking up after about 3-4 days with web browsing slowly going downhill until the lockup during that time, I experienced the same thing.
I realised that I had SPI enabled, which in the past I haven’t had enabled, I disabled it and so far I haven’t had any lockups, it appears the SPI is overloading my router after a few days which to me is surprising for such a supposedly powerful router.
If you experience the lockups try disabling SPI, the other more common solution to do is to disable DNS relay, I’m not sure why this would be causing the router to lockup but it appears to be something to do with the latest firmware, hopefully they fix this in future firmwares.